USB to I2C Professional with 14 pin split cable

$260.00

USB-to-I2C Professional with 14-pin split cable includes:

  • Hardware
  • Downloadable software
  • 14-Pin split cable
  • 3 ft. USB cable

Description

USB to I2C Professional with 14-pin split cable

USB to I2C Professional with 14-pin split cable is a general purpose I2C and SPI interface tool that allows a user to communicate with any I2C or SPI slave devices. USB-to-I2C includes the USB-based hardware and Windows software and driver that is compatible with 32-bit and 64-bit versions of XP, Vista, Windows 7, Windows 8, and Windows 10.  Click on our Software Overview tab above to view I2C Device part numbers which are supported. 

The USB to I2C software can be use as an I2C eeprom programmer because it has the capability to program I2C and SPI serial eeproms, ram, and fram from 16 bytes (128 bit) to 512k bits (64k bytes). Universal modes provide the flexibility to communicate with any I2C slave device.

The hardware of the USB to I2C Professional with 14-pin split cable,  is capable of transmitting I2C up to 1 Mb/s (note the I2C spec limits the speed to 400 Kb/s) and SPI up to 4Mb/s. There are 3.3V and 5V switchable power outputs on the USB-to-I2C hardware allowing you to supply low-power target systems.
USB to I2C Professional with 14-pin split cable, provides a full interface between your PC and the I2C bus.

Click here to download the USB-to-I2C Software User’s Manual
Click here to download the USB-to-I2C DLL User’s Manual
Click here to download the USB-to-I2C Hardware User’s Manual
Click here to download an demonstration version of the USB-to-I2C software

USB to I2C Professional with 14-pin split cable includes:

  • Hardware
  • Downloadable software
  • 14-Pin split cable
  • 3 ft. USB cable

Hardware Details

USB to I2C Professional is a general purpose I2C and SPI interface tool that allows a user to communicate with any I2C or SPI slave devices. USB-to-I2C includes the USB-based hardware and Windows software and driver that is compatible with 32-bit and 64-bit XP, Vista, Windows 7, and Windows 8.

The hardware is capable of transmitting I2C up to 1 Mb/s (note the I2C spec limits the speed to 400 Kb/s) and SPI up to 4Mb/s. There are 3.3V and 5V switchable power outputs on the USB-to-I2C hardware allowing you to supply low-power target systems.

Software Overview

The USB to I2C software can be use as an I2C eeprom programmer because it has the capability to program I2C and SPI serial eeproms, ram, and fram from 16 bytes (128 bit) to 512k bits (64k bytes). Universal modes provide the flexibility to communicate with any I2C slave device.

IO Expanders – We support the part numbers below.

PCA8574 PCA8574A PCA8575 PCA9500
PCA9501 PCA9502 PCA9505 PCA9506
PCA9534 PCA9535 PCA9536 PCA9537
PCA9538 PCA9539 PCA9554 PCF8575
PCA9554A PCA9555 PCA9556 PCA9557
PCA9574 PCA9575 PCA9670 PCA9671
PCA9672 PCA9673 PCA9674 PCA9674A
PCA9675 PCA9698 PCF8574 PCF8574A
PCF8575      

Multiplexers – We support the part numbers below.

PCA9540B PCA9542A PCA9543A
PCA9544A PCA9545A PCA9546A
PCA9547 PCA9548A PCA9549

LED Drivers – We support the part numbers below.

PCA9530 PCA9531 PCA9532 PCA9533
PCA9550 PCA9551 PCA9552 PCA9553
PCA9622 PCA9624 PCA9626 PCA9632
PCA9633 PCA9634 PCA9635 PCA9685
SAA1064      

Master Selector

PCA9541      

Non-volatile Registers

PCA8550 PCA9559 PCA9560 PCA9561

Real-time Clocks

PCF8563      

Thermal Management / Temperature Sensors

LM75A LM75B NE1617(A) PCT2202
PCT2075 SA56004 SE97 SE97B
SE98(A)      

Downloads

USB-to-I2C Pro V7 Installation for 32-bit Windows

USB-to-I2C Pro V7 Installation for 64-bit Windows

USB-to-I2C Professional Documentation

Click here to download the USB to I2C Software User’s Manual

Click here to download the USB to I2C Professional DLL User’s Manual

Click here to download the USB to I2C Hardware User’s Manual

Click here to download the USB to I2C Professional Demo Software