USB to I2C Professional Package
USB to I2C Professional Package is a general purpose I2C and SPI interface tool that allows a user to communicate with any I2C or SPI slave devices. USB-to-I2C includes the USB-based hardware and Windows software and driver that is compatible with 32-bit and 64-bit versions of XP, Vista, Windows 7, Windows 8, and Windows 10. Click on our Software Overview tab above to view I2C Device part numbers which are supported.
The USB to I2C Professional software can be use as an I2C eeprom programmer because it has the capability to program I2C and SPI serial eeproms, ram, and fram from 16 bytes (128 bit) to 512k bits (64k bytes). Universal modes provide the flexibility to communicate with any I2C slave device.
The hardware is capable of transmitting I2C up to 1 Mb/s (note the I2C spec limits the speed to 400 Kb/s) and SPI up to 4Mb/s. There are 3.3V and 5V switchable power outputs on the USB-to-I2C hardware allowing you to supply low-power target systems.
The I2C and SPI Isolator and Level Shifter incorporates high-speed digital isolators to provide 3.75kV of voltage isolation. There is also level shifting hardware included to allow the user to operate both the I2C and SPI interface from 2.5V to 5.5V.
The Isolator and Level Shifer connects directly to the USB-to-I2C Professional and Elite through the cables included in those kits.
Click here to download the user manual USB-to-I2C Isolator and Level Shifter
USB to I2C Professional Package includes:
- Professional hardware
- I2C & SPI Isolator
- Downloadable software
- Ribbon cable
- 3 ft. USB cable
Savings of $29.00